Inline Curing Ovens

IR2000

IR2000 Infrared Heat Curing Chamber

IR2000

Infrared Heat Curing Chamber

PVA’s IR2000 utilizes infrared panels to efficiently cure adhesives and coatings in a controlled, heated environment.

IR2000 Infrared Heat Curing Chamber Spec Sheet

The IR2000 is available in 4’, 8’, 12’, and 16’ curing lengths in single or double-sided configurations. The IR2000 offers custom heat profiling in each two foot section. Each infrared panel is constructed of coated stainless steel for easy cleaning and maintenance.

The IR2000 has many integrated features including:

  • Edge carrying, variable speed pin chain conveyor
  • Rail expansion compensation
  • SMEMA communication protocol
  • Allen Bradley Micrologix PLC controller
  • OIT touch panel with display screen
  • Four-inch top and bottom side component clearance
  • Humidity and CO2 presence optional
  • Thermocouple process control with independent over
  • Temperature protection

 

SYSTEM SPECIFICATIONS

Power Requirements
208, 230, 400, 460 VAC, +/-10%, 50/60 Hz

Maximum Panel Temperature
260º Celsius (500º Fahrenheit)

Curing Length
1.2 m / 2.4 m (4 ft / 8 ft)

Independent Heating Zones
Programmable in two foot sections

Conveyor Speed
0.15 m/min to 5.8 m/min
(0.5 ft/min to 19 ft/min)

 

 

Board / Pallet Width
51 mm to 457 mm
(2 in to 18 in)

Component Clearance
100 mm (4 in) top and bottom

Conveyor Height
940 mm to 965 mm from floor
(37 in to 38 in, SMEMA standard)

Exhaust
300 cfm exhaust fan with low level
alarm included

Certification
CE

Share/Bookmark