Automated Dispensing

FCM100

FCM100 Non-Contact Micro Dispensing Valve

Valves

FCM100

Non-Contact Micro Dispensing Valve

The FCM100 is ideal for any low viscosity underfill, encapsulant, conformal coating, and micro dot or bead dispensing project.

FCM100 Non-Contact Micro Dispensing Valve Spec Sheet

The FCM100 is ideal for any low viscosity underfill, encapsulant, conformal coating, and micro dot or bead dispensing project. The FCM100 “propels” precise shots of fluid onto a substrate resulting in accurate patterns at a high robot speed as no in process z-axis adjustments are required. The FCM100 is compatible with all PVA automated platforms.

The FCM100 has many integrated features including:

  • Interchangeable 22, 25, 27, 28, 30, 32, and 33 gauge tip designs for various dispensing profiles
  • Micrometer flow adjustment with lock ring
  • inMOTION™ dispensing with no z-axis motion needed
  • Highly repeatable dot size results in superior pattern definition
  • Dot and continuous line dispensing profile capability
  • Divorced valve design prevents material contamination of the air body

image


VALVE SPECIFICATIONS

Dimensions
152 mm x 19 mm x 19 mm
(6.00" x 0.75" x 0.75")

Minimum Shot Size
0.83 µl

Minimum Line Width
0.25 mm (0.010")

Minimum Orifice Inside Diameter
0.08 mm (0.003")

Viscosity Range
1 cps – 20,000 cps

Operating Air Pressure
60 – 100 psi

Operating Fluid Pressure
1-100 psi

Wetted Components
Stainless steel, Teflon®, Kalrez®


The FCM100 micro dispensing valve is available in the following configurations:

FCM100-22G     
Non-contact Micro Dispensing Valve with 22g tip

FCM100-25G     
Non-contact Micro Dispensing Valve with 25g tip

FCM100-27G     
Non-contact Micro Dispensing Valve with 27g tip

FCM100-28G     
Non-contact Micro Dispensing Valve with 28g tip

FCM100-30G     
Non-contact Micro Dispensing Valve with 30g tip

FCM100-32G     
Non-contact Micro Dispensing Valve with 32g tip

FCM100-33G     
Non-contact Micro Dispensing Valve with 33g tip

Share/Bookmark