MV500 Positive Displacement Metering Valve

Positive Displacement Metering Valves


Positive Displacement Metering Valve

The MV500 is a true positive displacement metering valve capable of dispensing deposits of material in a highly accurate process.

MV500 Positive Displacement Metering Valve Spec Sheet

The deposit volume is determined by the metering cylinder’s stroke adjustment setting and is not affected by variations in viscosity or material pressure. The MV500 is compatible with all PVA automated platforms.

The MV500 has many integrated features including:

  • 0.10 cc to 1.45 cc shot size
  • Reduced fluid volume inside valve for increased repeatability
  • Front closing dispense valve on outlet check for accurate shutoff
  • Stainless steel fluid section for optimum material compatibility
  • Adjustable dispense rate
  • Micrometer adjustment permits shot size modification
  • 5:1 pressure advantage on metering cylinder
  • Optional limit sensors for “ready to dispense” and “dispense complete” feedback


MV500 Shot Size Range
0.10 cc to 1.45 cc


159 mm x 38 mm x 59 mm
(6.25 in x 1.50 in x 2.33 in)

Viscosity Range
1 cps – Paste

Operating Air Pressure
60 – 100 psi

Inlet Fluid Pressure
50 – 350 psi

Maximum Generated Outlet Fluid Pressure
500 psi

Wetted Components
Stainless steel, Kalrez®, Teflon®


PVA also offers the following products to improve your dispensing application:

MV500 spare parts kit

Teflon® and Kalrez® are registered trademarks of Dupont.