Valves

FCS300

FCS300 Stainless Steel Spray Valve

Spray Valves

FCS300

Stainless Steel Spray Valve

The FCS300 spray valve provides a repeatable, concentrated coating film in pattern widths ranging from 0.25” to over 2”.

FCS300 Stainless Steel Spray Valve Spec Sheet

The atomized spray process resulting from the FCS300 will produce conical (round cap) or fan-shaped (flat cap) patterns with transfer efficiencies in excess of 99%. The FCS300 features a micrometer flow adjustment that makes fine tuning of your process easier than ever.

The FCS300 has many integrated features including:

  • Low pressure, low volume atomized process
  • 300 series stainless steel fluid body for superior material compatibility
  • Interchangeable spray cap offers fan and oval-shaped patterns
  • Micrometer flow adjustment with lock nut
  • Divorced valve design prevents contamination of the air section
  • Compatible with all commercially available conformal coatings
  • Wide viscosity range offers versatility for virtually any spray application

image

The FCS300 is available on the Delta 6, PVA2000, PVA6000, and PVA350 Selective Coating Systems, can be retrofitted to any existing PVA system, or can be acquired for any manual spray application.


VALVE SPECIFICATIONS

Dimensions
168.4 mm x 22 mm x 22 mm
(6.63 in x 0.866 in x 0.866 in)

Weight
9 oz

Viscosity Range
1 cps – Paste

Operating Air Pressure
60 – 100 psi

Maximum Inlet Fluid Pressure
2500 psi

Wetted Components
Stainless steel, Teflon®, Kalrez®

Transfer Efficiency
99%

Spray Pattern Width (Round Cap)
0.25 in – 1 in

Spray Pattern Width (Flat Cap)
0.75 in – 2 in+

 

PVA also offers the following products to improve your dispensing application:

FCS3-SP FCS300 spare parts kit
V317 Flat spray cap
V318 Round spray cap


Teflon® and Kalrez® are registered trademarks of Dupont.

Share/Bookmark