Our commitment to providing exceptional customer support begins with a 24-hour global service network, including regionally trained technicians for fast response times.
Selective Conformal Coating Systems
Our Selective Conformal Coating Systems combine closed-loop process control, a high level of accuracy, and repeatability for use in moderate to high volume manufacturing environments.
Delta 6 Selective Coating / Dispensing System
The Delta 6 is a new, reimagined flexible robotic conformal coating/dispensing system that is ideal for selective coating, potting, bead, and meter-mix dispensing applications.
Delta 8 Selective Coating / Dispensing System
The Delta 8 is a robotic selective conformal coating/dispensing system, providing maximum work area flexibility to perform a wide variety of applications.
PVA350 Benchtop Selective Coating / Dispensing System
The PVA350 is a flexible three or four-axis robot that is suitable for virtually any benchtop or laboratory selective coating and automated dispensing application.
FCM100 Non-Contact Micro Dispensing Valve
FCS300-ES Extended Spray Valve
The FCS300-ES Extended Spray Valve provides a repeatable, concentrated coating film in a fine, circular pattern widths ranging from 0.125” to 0.5”.
FCS300 Spray Valve
The FCS300 Spray Valve provides a repeatable, concentrated coating film in pattern widths ranging from 0.25” to over 2”. The atomized spray process resulting from the FCS300 will produce conical (round cap) or fan-shaped (flat cap) patterns with transfer efficiencies in excess of 99%.
FC100-C4 Non-Atomized Flow Coating Valve
The FC100-C4 Flow Coating Valve produces a sharp, non-atomized stream of low viscosity fluids and coatings.
FC100-CF Film Coating Valve
The FC100-CF Film Coating Valve produces a sharp, non-atomized stream of low viscosity fluids and coatings. The resulting precise application process is ideal for solvent based chemistries requiring wet film builds of at least 0.008”.
FC100-MC Stainless Steel Dispensing Valve
The FC100-MC is a versatile dispensing valve for single-component bead, dot, potting, or encapsulation projects.